5xxx and 6xxx aluminum alloys are widely used for the car door panels. 5000 aluminum, namely aluminum-magnesium alloy, is usually used for car interior covering parts, such as doors, roofs, floors and other parts.
This type of alloy has good formability and corrosion resistance, and is suitable for decorative and structural parts inside the car body. Since 5 series aluminum has moderate strength, it is usually not used for external covering parts that are subject to large impacts.
5754 thin aluminum sheet is stamped in batches to form the door lining, and its forming rate is high and the quality is good. The magnesium alloy content of 5754 aluminum sheet is relatively high, and it is superior to 5052 in strength and corrosion resistance, and can meet the operating requirements of automobiles in various environments. For more almg3 properties, you can have a deep visit our website.
5182 aluminum sheet is used for automobile parts and automobile door panels. It belongs to the high-strength aluminum-magnesium alloy. It has good corrosion resistance, excellent weldability, good cold workability, and medium strength.
Doors and engine hoods are covers that have very low strength requirements, and the most important requirement is stiffness and deformation. Ordinary mild steel or 6 series aluminum plates can be used here. The weight reduction effect of aluminum plates is very obvious on these parts.
6000 series is an aluminum-magnesium-silicon alloy with high strength, good plasticity and excellent corrosion resistance. It is the most mainstream aluminum alloy material for automobiles and is commonly used in body structural parts such as roofs, trunk lids, and doors.
AA6016 aluminum alloy plates are used on the outer panels of car doors. They can meet the dent resistance design requirements by increasing the thickness of the aluminum plates and optimizing certain structures.
Under the premise of meeting the stiffness, strength design requirements and relevant collision regulations, AA6016 aluminum alloy plates can be widely used in automobile door outer panels to replace traditional steel plates, reducing their weight by more than 40% and achieving the purpose of lightweight.
Aluminium grade 6061 is an aluminum sheet used for lightweight car bodies. Automobile fender, hood outer panel and car panel all can choose 6061 aluminum sheet. 6061 aluminum sheet has excellent processing performance, good corrosion resistance, no deformation after processing, easy coating, good anodizing effect and other excellent characteristics.
Original Source:https://www.autoaluminumsheet.com/a/what-is-the-car-door-panels-material.html
Tags: 6061 aluminum sheet ,
Next:Which Aluminum Alloys Are Cars Made From